|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STB12NM60N/-1 - STF12NM60N STP12NM60N - STW12NM60N N-channel 600V - 0.35 - 10A - D2/I2PAK - TO-220/FP - TO-247 Second generation MDmeshTM Power MOSFET Features Type STB12NM60N STB12NM60N-1 STF12NM60N STP12NM60N STW12NM60N VDSS (@Tjmax) 650V 650V 650V 650V 650V RDS(on) < 0.41 < 0.41 < 0.41 < 0.41 < 0.41 ID 1 3 3 12 10A 10A 10A(1) 10A 10A DPAK IPAK TO-247 3 1 2 3 1 2 1. Limited only by maximum temperature allowed 100% avalanche tested Low input capacitance and gate charge Low gate input resistance TO-220 TO-220FP Internal schematic diagram Description This series of devices implements second generation MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the Company's strip layout to yield one of the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. Application Switching application Order codes Part number STB12NM60N STB12NM60N-1 STF12NM60N STP12NM60N STW12NM60N Marking B12NM60N B12NM60N F12NM60N P12NM60N W12NM60N Package DPAK IPAK TO-220FP TO-220 TO-247 Packaging Tape & reel Tube Tube Tube Tube April 2007 Rev 2 1/18 www.st.com 18 Contents STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 6 Test circuit ................................................ 9 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Electrical ratings 1 Electrical ratings Table 1. Symbol Absolute maximum ratings Value Parameter DPAK/IPAK TO-220FP TO-220/TO-247 600 25 10 6.3 40 90 15 -2500 10 (1) 6.3 (1) 40 (1) 25 Unit VDS VGS ID ID IDM (2) PTOT dv/dt (3) VISO Tj Tstg Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Operating junction temperature Storage temperature V V A A A W V/ns V -55 to 150 C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 10A, di/dt 400A/s, VDD =80% V(BR)DSS Table 2. Symbol Rthj-case Rthj-amb Tl Thermal data Parameter Thermal resistance junction-case max Thermal resistance junction-amb max Maximum lead temperature for soldering purpose DPAK/IPAK TO-220FP TO-220/TO-247 1.38 62.5 300 5 Unit C/W C/W C Table 3. Symbol IAS EAS Avalanche characteristics Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) Single pulse avalanche energy (starting Tj=25C, ID=IAS, VDD= 50V) Max value 3.5 200 Unit A mJ 3/18 Electrical characteristics STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. Symbol V(BR)DSS dv/dt(1) On/off states Parameter Drain-source breakdown voltage Drain-source voltage slope Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1mA, VGS= 0 VDD = 400V,ID = 10A, VGS = 10V VDS = Max rating, VDS = Max rating,@125C VGS = 20V VDS= VGS, ID = 250A VGS= 10V, ID= 5A 2 3 0.35 Min. 600 41 1 10 100 4 0.41 Typ. Max. Unit V V/ns A A nA V IDSS IGSS VGS(th) RDS(on) 1. Characteristics value at turn off on inductive load Table 5. Symbol gfs(1) Ciss Coss Crss Coss eq.(2) Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Gate input resistance Test conditions VDS =15V, ID= 5A VDS = 50V, f =1MHz, VGS = 0 Min. Typ. 8 960 65 7 180 Max. Unit S pF pF pF pF VGS = 0, VDS = 0V to 480V f=1MHz Gate DC Bias=0 Test signal level=20mV open drain VDD = 480V, ID = 10A VGS = 10V (see Figure 18) Rg 5 nC nC nC Qg Qgs Qgd 1. Total gate charge Gate-source charge Gate-drain charge 30.5 5 16 Pulsed: pulse duration = 300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/18 STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Electrical characteristics Table 6. Symbol td(on) tr td(off) tf Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 300V, ID = 5A, RG = 4.7, VGS = 10V (see Figure 17) Min Typ 15 9 60 10 Max Unit ns ns ns ns Table 7. Symbol ISD ISDM (1) VSD(2) trr Qrr IRRM trr Qrr IRRM 2. Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 10A, VGS=0 ISD =10A, di/dt =100A/s, VDD = 100V, Tj = 25C (see Figure 19) VDD = 100V di/dt =100A/s, ISD = 10A Tj = 150C (see Figure 19) 360 3.5 20 530 5.20 20 Test conditions Min Typ Max 10 40 1.3 Unit A A V ns C A ns C A 1. Pulse width limited by safe operating area Pulsed: pulse duration = 300s, duty cycle 1.5% 5/18 Electrical characteristics STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N 2.1 Figure 1. Electrical characteristics (curves) Safe operating area for TO-220 / DPAK / IPAK Figure 2. Thermal impedance for TO-220 / DPAK / IPAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for TO-247 Figure 6. Thermal impedance for TO-247 6/18 STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Figure 7. Output characteristics Figure 8. Electrical characteristics Transfer characteristics Figure 9. Transconductance Figure 10. Static drain-source on resistance Figure 11. Gate charge vs. gate-source voltage Figure 12. Capacitance variations 7/18 Electrical characteristics STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Figure 14. Normalized on resistance vs. temperature Figure 13. Normalized gate threshold voltage vs. temperature Figure 15. Source-drain diode forward characteristics Figure 16. Normalized BVDSS vs. temperature 8/18 STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Test circuit 3 Test circuit Figure 18. Gate charge test circuit Figure 17. Switching times test circuit for resistive load Figure 19. Test circuit for inductive load Figure 20. Unclamped Inductive load test switching and diode recovery times circuit Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform 9/18 Package mechanical data STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/18 STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Package mechanical data TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 11/18 Package mechanical data STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 12/18 G STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch 13/18 Package mechanical data STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 14/18 STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Package mechanical data TO-247 MECHANICAL DATA mm. MIN. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 0.140 0.177 0.216 14.80 4.30 0.560 0.14 0.728 0.143 0.216 TYP MAX. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 MIN. 0.19 0.086 0.039 0.079 0.118 0.015 0.781 0.608 0.214 0.582 0.17 inch TYP. MAX. 0.20 0.102 0.055 0.094 0.134 0.03 0.793 0.620 DIM. A A1 b b1 b2 c D E e L L1 L2 oP oR S 15/18 Packaging mechanical data STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 16/18 STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Revision history 6 Revision history Table 8. Date 26-Mar-2007 23-Apr-2007 Revision history Revision 1 2 First release Complete version Changes 17/18 STB12NM60N/-1 - STF12NM60N - STP12NM60N - STW12NM60N Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18 |
Price & Availability of STP12NM60N |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |